Skip to content
BreakingChips

ISO metric · fine

M16 × 1.5 tap drill size

For general work, OSG suggests 65–70% of full thread. Harder materials and deep holes want less; the calculator sets it from your material.

Cut tap

14.5 mm

0.5709" · 77% thread

Or 37/64 (0.5781") for 68%

Form tap

15.5 mm

0.6102" · 49% thread

Open M16 × 1.5 in the calculator

Pick your material for its % of thread, tapping RPM and the rigid-tap code.

Thread dimensions

Major Ø
16.000 mm (0.6299")
Pitch
1.5 mm
Pitch Ø (basic)
15.026 mm (0.5916")
Minor Ø (internal, basic)
14.376 mm (0.5660")
Thread depth (internal)
0.812 mm (0.0320")

Basic sizes of the 60° form. Tolerance classes (6H) set the limits around them.

Cut tap drills

For a cutting (fluted or spiral) tap. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.

Cut tap drills for M16 × 1.5
DrillØ inØ mmThread
14.5 mm0.570914.5077%
37/64suggested0.578114.6868%
15 mm0.590615.0051%

Form tap drills

A form (roll) tap displaces metal instead of cutting it, so it needs a bigger hole. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.

Form tap drills for M16 × 1.5
DrillØ inØ mmThread
39/640.609415.4851%

3-wire measurement

Best wire size
0.866 mm (0.0341")
Over wires, at basic pitch Ø
16.325 mm (0.6427")

For the external thread (the screw). The best wire touches the flanks at the pitch diameter.

Sources