ISO metric · fine
M1 × 0.2 tap drill size
For general work, OSG suggests 65–70% of full thread. Harder materials and deep holes want less; the calculator sets it from your material.
Cut tap
0.8 mm
0.0315" · 77% thread
Form tap
0.9 mm
0.0354" · 74% thread
Pick your material for its % of thread, tapping RPM and the rigid-tap code.
Thread dimensions
- Major Ø
- 1.000 mm (0.0394")
- Pitch
- 0.2 mm
- Pitch Ø (basic)
- 0.870 mm (0.0343")
- Minor Ø (internal, basic)
- 0.783 mm (0.0308")
- Thread depth (internal)
- 0.108 mm (0.0043")
Basic sizes of the 60° form. Tolerance classes (6H) set the limits around them.
Cut tap drills
For a cutting (fluted or spiral) tap. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.
| Drill | Ø in | Ø mm | Thread |
|---|---|---|---|
| #68 | 0.0310 | 0.79 | 82% |
| 1/32 | 0.0313 | 0.79 | 79% |
| 0.8 mm | 0.0315 | 0.80 | 77% |
| #67 | 0.0320 | 0.81 | 72% |
| #66 | 0.0330 | 0.84 | 62% |
Form tap drills
A form (roll) tap displaces metal instead of cutting it, so it needs a bigger hole. Every standard drill from 50% to 85% thread; suggested rows are in the 65–70% band.
| Drill | Ø in | Ø mm | Thread |
|---|---|---|---|
| #65 | 0.0350 | 0.89 | 82% |
| 0.9 mm | 0.0354 | 0.90 | 74% |
| #64 | 0.0360 | 0.91 | 63% |
3-wire measurement
- Best wire size
- 0.115 mm (0.0045")
- Over wires, at basic pitch Ø
- 1.043 mm (0.0411")
For the external thread (the screw). The best wire touches the flanks at the pitch diameter.
Sources
- ISO 261 / ISO 262 — ISO general purpose metric screw threads: general plan and selected sizes
- OSG — Tap drill size and pitch diameter limit chart (formula, suggested % of full thread)
- Cutting Tool Engineering — "Threads will roll": form tap hole size = D − 0.0068 × % / TPI
- ASME B94.11M — Twist drills (fractional, number, letter and metric sizes)
- NIST (NBS) Letter Circular 23 and Pratt & Whitney — three-wire thread measurement, best wire size